18th August 2014

The British Standards Institution published new standards in February 2014 based upon the European Standards on safety requirements to address certain risks posed to children by internal blinds, corded window coverings and safety devices. These Regulations apply to all businesses but not to a consumer therefore any installer will be subject to the Regulations as will any business entity. The Regulations run to forty pages but a short summary is shown below.

  1. Businesses must sell a safe product.
  2. The Standards affect any device used for internal blinds or curtain tracks including but not limited to, vertical blinds, roller blinds, Roman blinds and plantation shutters.
  3. The Standards apply to blinds which have cords or chains fitted with a hazardous loop that could create a hazard in premises where there are children aged between 0 and 42 months who are likely to have access or be present.
  4. All new blinds or curtain tracks which are fitted by a professional must pass the new standard that specifies safety requirements and test methods for safety devices to improve safety and help prevent accidents. These safety devices can be fitted during manufacture or where blinds or curtain tracks have already been installed be retro-fitted to window blinds and tracks.

Practical Issues
If a blind or curtain track is purchased new then it should contain a label regarding safety and compliance with the Standard together with a safety device installed to prevent strangulation of a young child by a dangerous loop made of cord material or ball bearings. When choosing new window blinds in houses or public buildings such as offices it is strongly recommended that the chosen blind is safe by design which means it does not use cords or chains to operate it; or if they are fitted then the cords or chains are either concealed or tension cords and chains. However Agents should check existing properties where blinds or tracks with cords are already fitted and if there is a long or loose loop arrange the fitting of a cleat or snap connector retrospectively to these items as a matter of urgency.

If an accident did occur the Trading Standards could take action for failure by an Agent to have such devices fitted.